Question about KP-51WS500 51" Rear Projection Television
...RCA TV output KP51WS500 Top TV Experts, All the Inputs works well ( Video 1 to 7 ). The Audio output red and white RCA work well to. The video monitor output dont work. When i plug monitor tv in to ...
...RCA Video output to monitor Audio works fine but no video output on the monitor (television) from any of the input sources. I have tried both S-Video as well as the RCA monitor outputs but nothing ...
...output do i use to supply signal to an amp used to power two speakers? can i still use the four sets of speaker wire for four more speakers? You can use either set of RCA outputs for the amplifier ...
...RCA's to it. One set to the front output the other to the Sub output. My problem is that the HU is not seeing the rca's connected to the sub out and giving me sub control from the hu. The manual says ...
...on your TV will have the same colour. Remember to plug in the RCA cables into te sound output on the TV and into the AUX input on the Sony player. Really hope this can be of help. Kind regards ...
Question about RCD-W500C 5-Disc CD Recorder
...output that can be adapted to an RCA cable, or you may have an actual Sound Card with RCA audio outputs. And you may have a SPDIF (coaxial) digital audio output that you could use but you have to go ...
Question about FD Trinitron WEGA KV-32FS100 32" TV
...output to RCA composite video for connection to your TV yellow video input. Connect an audio cable from laptop's earphone output to the TV's RCA audio inputs (white and red) using a 3.5mm to RCA ...
Question about FD Trinitron WEGA KV-32FS100 32" TV
...RCA cable. Connect white audio output on DVD player to white audio input on TV next to yellow. Connect red audio output on DVD (next to white) to red audio input on TV using RCA cable. Select on the ...
RCA output namely = VHF/UHF, Audio and Video. Use an RCA cable and connect to the Audio output. At the back of your amplifier, connect the other end of the RCA cable to an RCA input labeled Audio - L
RCA jacks and cables? Do you know if the deck's amp is putting out? Have you mixed up the channel wiring? Maybe confused the "input" and "output"? I did that once---output from deck to input on amp to
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions
