...OUTPUT. SOUND WAS OK THEN I WENT AND PURCHASED NEW RCA CABLES AND INSTALLED THEM. WORKED GREAT !!! TURNED UNIT OFF. NEXT DAY WENT TO TURN ON AND NOW I HAVE NO SOUND AT ALL. I PUT OLD CABLES BACK ON ...
RCA audio jacks output to the input RCA jacks of the Aiwa. That's what you would need. RCA audio outputs on the TV RCA audio input on the Aiwa Just look at the back of each unit and see if it has them
The TV is set to the video channel , be able to hear the sound but no picture on TV screen make sure the video (yellow) rca plug is in the correct output jack on the tv......
...output sockets you just need a 3.5 jack to two RCA phono plugs one. If not you will need a 3.5 to 3.5 lead. If using the headphone output, keep the volume low, use the computer recording device to ...
RCA cord for short or replaced if necessary. If the above simple fix didn't cure the error code, you can try the next steps if you are an electronics enthusiast. Now after removing the cover, you have
...output can be adapted to feed an RCA cable pair for standard stereo to any audio device with a standard RCA input (except PHONO). Get a cable like the one described here: ...
...output can be adapted to feed an RCA cable pair for standard stereo to any audio device with a standard RCA input (except one labeled "PHONO"). Get a cable like the one described here: ...
...output can be adapted to feed an RCA cable pair for standard stereo to any audio device with a standard RCA input (except one labeled "PHONO"). Get a cable like the one described here: ...
...output serve for in a aiwa 2300? I have two RCA outputs to connect to the speakers but there is also a third output and i don't know what to do with it. Check for oil on the spark plug in cylinder 2. ...
What do I do with the third output of an Aiwa 2300? I have two RCA outputs and a third output which I don't know what it is for? I believe this is a connection for a ground wire.
Usually answered in minutes!
110 Questions
49 Questions
43 Questions
33 Questions
30 Questions