...dial tone, I have 2 lines in one and i have it all plugged in right. What am i doing wrong? check the power or battery of this phone. and make sure the tel jack is wire up for 2 line phone,if you ...
...Dial Tone both line 1 & line 2 buttons are lit. Phone appears to be working, but no dial tone. Any suggestions? If you are sure that both cords are good (use another phone to test), make sure the ...
dial out) I have 2 RCA Executive series phones (RCA 25414RE3) that I have had for 3 months. One just quit working while I was in the middle of a call, no dial tone, or anything, can't get the phone to
RCA Phone model 252025 - displays Answer... on line 1 Line 1 says "Answer..." I suspect the answerer is stuck in record mode. How do I reset it? It makes my line look busy! The Thomson folks said to ...
...dial tone coming to the phone unit but it won't transfer to the phones. I switched phone line #4 to plug in #3 on my board in it worked fine. But when i switched phone line #3 to the plug in # 4 ...
...dial out I know there is a simpe solution to this but I can't find it right now. My RCA ViSYS 2 line had a long power interruption. It has been restored to default, incoming calls are fine, but I ...
dial tone but when the person answers he/she can't hear me. This feature always worked in the past but suddenly, I have this problem Do you put the handset back in its cradle when you party answers? I
...dial tone comes from the 2nd RJ-14 jack on the wall. On every phone, you could swap the plugs so that line 1 comes into line 3 and line 3 comes into line 1 (you'll lose the intercom) and see if you ...
Question about Accessory Handset for 25255RE1 25055RE1 25055RE1
rca visys 25055re1-a 2-line.. line 1 has no dial tone, line 2 works fine you can contact the mobile service provider........
Question about Accessory Handset for 25255RE1 25055RE1 25055RE1
...dial tone. Dial the phone number to which your calls are to be forwarded. If there's an answer at the number you are forwarding to: Make sure you keep the line open for at least 5 seconds to activate ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions