Questions & Answers for: Panasonic VIERA rc 10

my panasonic th-50pz800u won't power up. The power lights blinks 10 times then pause 10 times then blinks a again? A red light blinking 10 times means that a video board has gone bad. Contact ...

panasonic th-50px60u power indicator is blinking 10 times There are two guides, one for 10 blinks at power on: or, 10 blinks at plug in: Jeff, Any chance you could post the flow chart above in a ...

...can be a host of problems with the television. Something has failed and tripped the SOS detect circuit (causing the 10 blinks). You would have to take this thing apart and trace down voltages from ...

TV will not start and power button flashes 10 times then 1 time then restarts same pattern 10-1. The 10-1 flash is usually the A board part number TNPH0716ABS

...device to some other like a DVD that you are sure works. Look for loose contacts in power outlet, RC Jacks, sockets, cables. If problem persists, call in a qualified service

...those also. Thank you in advance. These problems can be created by loose contacts in power outlet, RC jack, cable, sockets.   Check these thoroughly and if necessary, change the RC

same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing

...constant If you have tried using different input devices, looked for loose contactsin power outlet, RC Jack, cable and connectors, the TV might need service.  Also look for any jammed buttons on ...

10 minutes to turn back on. Sleep timer is off. If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV

panasc plasma tv Viera TC-P42C2 10 flashing red lights 10 red lights flashing tv went off, will not turn back on 10 blinks power supply board defective