Questions & Answers for: ranger rci 2950

RCI 2950 WORKS FOR ABOUT 3 MIN THEN STOPS TURN OFF FOR TEN MIN WORKS AGAIN Hello, Just offhand I'd say you have a bad solder joint on the main circuit board. Without more info, I can not tell you ...

rci 2950 reception problem i cannot seem to get any ssb reception on my mobile i use to get australia i us regular i can get trucking channel on am Mannix, I have not checked skip conditions lately, ...

...Ranger RCI-2950 will the display stop working if the internal battery gets old or flat. Mine comes on and works for a while then after about 20 mins a few legs of the display starts flashing on and ...

...Ranger RCI-2990 I need a manual to base station CB Ranger rci-2990. Can you tell me where to download or purchase this manual. Thanks http://www.rangerusa.com/websupport.html ...

...ranger 2950 what i have is a 2950 that sat for about 3 yrs ..i hooked it up recently and have talked to a few (close stations) but nothing like it use to do ...i hooked up another radio and skip was ...

my rci 2950 recieve cuts in and out, but my rci 2950 recieve cuts in and out, but tr, is fine check the ground wires A tuning can in the receive section of the radio is shorted.

...rci 2950. Ive had the same problem with mine,turns out with mine the processor would lock up,turning the radio off & on repeadly would clear the problem and the radio would work fine x-mit ...

ranger rci 2950 no am hash and sometimes loses lsb hash and wobbles on recieve and transmit hmmm my money is on a cold or several cold solder points,, start checking the legs on the PLL first... Check

ranger rci 2950 will not transmit rci will not transmit have you tried it on all bands? still won't transmit?take it to a tech so they can fix it properly.

where can I get a cpu board for my ranger 2950? I NEED THE CPU BOARD FOR EARLY VERSION OF THE RCI 2950? get hold of ranger and they should be able to help you.