Question about 8280 Mechanical Sewing Machine
...raise and lower the feed dog on my singer 8280?? On your Singer, you don't actually raise / lower the feed dog. Instead you attach a "darning plate" (which should have come with the machine) which ...
Question about 8280 Mechanical Sewing Machine
...feed dogs raised. I have a Singer Stylist 513 & I cannot get the feed dogs up in order for the fabric to move when I start sewing. Is there a switch or knob to change the feed dogs? The model 513 ...
...but the feed dog doesn't raise or lower down. Is this something I can repair? You should consult someone who repairs/restores old machines. They can best advise on how to proceed with this
Question about 8280 Mechanical Sewing Machine
...shows you where to flip the lever to raise the feed dogs. If your feed dogs are not grabbing fabric your feed dogs are lowered. ...
Question about 8280 Mechanical Sewing Machine
...not move at all why? I suggest getting out your manual and looking up lower and raising the feed dogs. When the feed dogs are lowered they don't move. You could have lowered them without realising
...as an accessory on page 4.) So the feed dogs should not raise or lower other then during normal sewing action of moving the fabric. Singer 6235 User Manual Page 24 Singer 6235 User Manual Page 6
...raise and lower feed dog singer 1425n According to the manual below, your machine is not capable of raising and lowering the feed dogs. Instead, your machine came with a cover plate that slips over ...
Question about 8280 Mechanical Sewing Machine
Lowered feed dogs, now feed dogs won't raise I have moved the feed dog switch and nothing happens, still won't raise feed dogs Typically, the feed dogs do not raise until the machine begins to stitch
Question about 8280 Mechanical Sewing Machine
feed mechanism will not raise up to. move the material along. My machine came from an estate sale and I have cleaned and oiled it. Make sure the pressure on the presser foot is activated. If it is set
...raise the needle and presser foot. Open the slide plate over the bobbin by sliding it towards you. Lift up the front edge of the cover and pull it away. Close the slide plate and lower the presser ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions