Questions & Answers for: quantum fireball recognized

...the fireballs either as secondary or slave. Another way is to download a diagnostic software from quantum dgdsk250.exe, install in a diskette and boot your on that diskette with your fireballs ...

computer wont recognize usb drive my computer wont recognize my 2gb impact flash drive and the light on it also wont turn on and i dont know what the problem is. try to use another connector! and try ...

...quantum fireball lct 20 please i nedd to know how do i set up this hard drive as slave, i need to move the jumper to the coreect posicion. thank you I installed a 30 gig hard drive as secondary to 80 ...

quantum fireball AS 20.5-GB hard drive to the slave and i don't know what to set it on. what one should i set it on for the slave DS, CS, PK, or Rsvd. please help. If you set it to CS and then plug it

...quantum fireball but its older and doesnt have much memory as a slave. It only has 6 gigs and it full with my music and such. i dont want to erase it because i use it to make new music, so i take it ...

Does the Intel 82801 chipset recognize the full capacity of a quantum 20gb hard drive? Yes it should recognize such small drive. Note that the partitions on the drive will affect how big drives are ...

...quantum fireball lct 20 hard disk to my computer. When turned on, it cannot detect the hard disk. Tried several position jumper configuration but still not detected. Please advise on how to set ...

Quantum Fireball Plus LM30 hard drive from my Windows 2000 Professional computer? The system recognizes the hard drive and says the device is working properly. If the files were placed on the drive by

not recognized G'day mate , as i have found in older computers the drives these days are not recognized by the motherboard/ system / is only for smaller drives , i have had to build a new machine and ...

...Quantum Fireball lct20 3.5" HDD to my note book through USB port. However, the computer doesn't have the driver to recognize the HDD. Can you provide me one please? Thanks. Hi, I dont think you need ...