Questions & Answers for: Chevrolet putting door on

power locks not working right The power locks on my 05 colorado wont work right with the remote. When you try to unlock the door with the remote it turns on the interior light but doesn't unlock the ...

driver's side door adjustment on a 2000 Chevy Blazer my driver's door needs adjusting, it does not close tightly which allows air and water to come through along the door and the upright along the ...

...door fully then putting a jack under the door (put a towel or pad down to prevent scratching) then raise the jack to take some weight off the hinge. Drive the pin out with a hammer and drift, install ...

how to install WINDOW REGULATOR My door is empty i just got the motor for doors and windows now im not 2 put together friendly i need to know how do i put this in my 86 monte carlo open the other door

need to replace driver side door handle on my 2003 astro van. Where do I start? Bud. you need to start by taking off the inside of the door and then take the three bolts on the side of the door where ...

I'm replacing the door handle on my 1999 Chev. Astro van...I closed the door and now it won't open..even the inside latch won't open the door take the door card/trim off and put your hand inside and ...

2002 Chevy S10 Third Door Won't Open The bottom latch is frozen & I can't get it to break loose. Any suggestions? The top latch is loose, but the bottom can't be moved at all. I can't get the ...

...door from flying open to fast you can get it out easy enough but putting it back in with out a special that i couldn;t even find when i did mine is not easy but the door will still work with out it ...

How do I remove old pins and bushings in a 99 chevy silerado put a jack under door to hold up take a big screw driver pull spring out the use screw driver to drive both pins out thenpull door away ...

Power locks work when I put the car into gear and unlock when I put the car in park but if i want lock/unlock with the button on the door they do not work. Any suggests? seems no current from the ...