...Epson, but their email is down ! you neeed a new blat or ribbon thats why its is banging I had this problem. I put a lite coat of lithium grease on the chrome carriage rod and the problem is
...put ink in the epson Lx-300....methods please... hi fushi puchase a new ribbon cassette (widely available on the internet)when it arrives, lift the printer cover,remove the old cassette (just lifts ...
Question about Stylus CX3200 All-In-One InkJet Printer
...ribbon to the Head. Took off the nozzles. I used a child's med. syringe with the tube. Filled it will rubbing alcohol. placed the tube on the head where the ink cartage attaches and slowly put ...
...Ribbon might have not rotating and the print will not be visible on the left and at right side it is bright. Better consult the local printer hardware enigneer and settle this iseeu. Put the original ...
Question about Stylus CX6000 All-In-One InkJet Printer
...put it back Yellow ribbon came undone on epson printer and can't put it back to replace the ribbon connector you first need to pull back the two tabs either side of where it is supposed t push in the ...
Question about Stylus CX6000 All-In-One InkJet Printer
...ribbon is worn out or it is broken, or it is put in wrong, or your print head isn't working. Pull the print head the whole way toward the paper (With the adjustment lever) and run a test sheet. Look ...
...ribbon. I also have taken the multi-part paper out and put back in. What can I do now? Thank you for any help. what type of operating system are you using?, if so pls try to update your driver. or ...
...put a new one i don't know how to do it Lift the front cover take hold of the cassette at each end and pull upwards. Before you do take note of the path that the ribbon takes across the print head ...
...on paper black form because of ribbon is touching to the paper for this solution is adjust head gap of the printer or put the leaver in 3+1 setting ...and try .... replace the ribbon mask
...,open the cassette with twizer ,take the old one out. Now ,put new one in such a way (That ribbon is there between the two gears) now rotate the gears & check that ribbon doesn't stuck
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions