Question about KV-35S42 35" TV
gun when the tube is warm. To remove this short, take a 22uF 250V capacitor and put an alligator clip from the negative lead to ground. Connect the positive lead of the capacitor to the 200 volt boost
Question about 46PP9302 46" Rear Projection Television
...label them correctly help i was changing out the ic's (convergence problems)and i took all the connectors off, replaced the ic's and put it all back together. the last set of wires that i need to ...
...gun to melt the solder on these four spots rocking the capacitors out of the holes as you do so. Just don't get solder over to any adjacent circuits. You end up with nicely marked pos/neg info on the ...
...put things back together I recommend that you read this completely before starting, so that you know what's coming up and can gather anything else you think you might need that I've forgotten ...
...put things back together I recommend that you read this completely before starting, so that you know what's coming up and can gather anything else you think you might need that I've forgotten ...
Question about 60PP9352 60" Rear Projection Television
...put the couple plastic pieces of trim and your done. The support side of crutchfield.com is a very good resource. But if you don't want to spend the cash for pigtail, you can create account on ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
