Questions & Answers for: put key back fujitsu laptop

key is sorta just floating there. How do i put it back the way it used to be? A few illustrations would be swell. if its been popping off for a while, the best thing would be super glue... if you dont

...back to an earlier date (a week or so) when this was functioning properly. If it does, try to log on to the mfg website and reinstall the keyboard driver for your laptop. Sounds like just a bad ...

key board problem When I am typing an email address, when i press the (@)button i get (") and when i press the (") button I get (@) I need to put it back to normal and dont know how to. Can you advice

...put the removed screw on the top right of the blank white page. When you have all the screw removed the first thing to come off is the section at the on/off button (about 1nch thick covers the six ...

...put the jumper back to pins 2 and 3. Your reset is now complete I really hope this can help you. http://solutions.us.fujitsu.com//www/content/pdf/bios/Momus3BIOS.pdf While in the BIOS, F9 will set ...

...key. If it looks ok, try putting it back on. If a plastic tab/clip is broken on the left side, you should be able to go to a small computer repair shop and get a replacement key for it. That way you ...

...put to one side. There are 3 tiny screws at the back that are just under the screen location remove them, the last screw is just under the key board in a deep recess remove it. Finally lift the top ...

...Put the battery back and power it on. If nogo, Plug an external monitor if possible. You should see something on your screen. If still nogo, possible LCD hardware issue. Could be a problem with the ...

key board this screw is located slightly to the right of center although there are four locking down tabs on the keyboard it is only held down in the second one from the right. (It?s the longest screw

...key to press normally will have the wireless icon )))) on it.Is the drive for the wireless installed?  Look in the device manager and see if your driver is installed, if not go download it for ...