...freon (has a slow leak) & your best bet would be to replace it! After ice on the coils and outside top of unit was thawed we cleaned the unit and waited 2 days then put the unit back together. After ...
...freon line...tech must troubleshoot. As I already said in my report of similar behavior the problem appears to be that the fan motor has burned out. If humid air is not constantly being pushed past ...
...freon. I have a GE unit that is also a portable air conditioner...works great for 5 years now... Best way to check the humidistat is with a digital or analog meter. Put the ohm meter on R1 if it's an ...
Question about S70408KG Bottom Freezer Refrigerator
...freon to a dehumnidifier. Which side should I add it to, the low side or the high side? How do I tell one side from the other? Can I use 134a like I put in my car's airconditioner? Peebody why do you ...
...Put the float wire up. finally it is out of r-14- freon. Vitally I have a Danby dehumidifier model DDR6011R and it runs but I have yet to empty any water from it. I have used other dehumidifiers in ...
...put freon into a dehumidifier? Can it be done? It can be done but you have to find and fix the leak first. These units are not supposed to lose refrigerant over time and the refrigerant doesn't wear ...
...put freon in this unit I have had a AD75UST0 WHIRLPOOL Dehumidifier for several years. If it actually still runs, I would suggest you take off covers and give the coils a good thorough cleaning. ...
...any water? whats wrond with it? it shows as humidity 70 and I put it at 50 and the machine is running but no water is accumulating. whats wrong with this machine? The Freon level could be
...pulled safety switch and put in jumper wire to by pass switch and still shows bucket full Could be low on freon or humidestat is bad.. Short out the humidestat and see if it runs, if so replace
Question about zenith zd309 30 pint dehumidifier auto shut-off external drain
...put Freon in my Zenith ZD 30 dehumidifier? nothing well the gas is put in at the factory then the port is sealed shut , field addn of gas is simply not done , besides something went bad that made it ...
Usually answered in minutes!
312 Questions
314 Questions
258 Questions
200 Questions
154 Questions