Questions & Answers for: put acer monitor base together

...ACER designers, have placed the capacitors so that they get all the heat from the heatsink! Yes folks, the capacitors are above the heatsink when the monitor is in its normal operating position! So ...

...Acer AL1913 an I want to put it on a wall mount. How do I remove the current base? Where the footpiece joins up with the screen, you'll find a round cover from left to right which just clips in. ...

acer logo continues appearing and dissapearing the same way. I have read about some faulty capacitors inside and I think I can remove them and check them with a universal bridge (I have one HP) but my

...put a plastic knife or such in the outside crack and work your way around once you have one side the rest will be easier. you have to bow the inside edge out(away from the lcd) because of the plastic ...

...MONITOR SCREEN IS FLICKERING.HELP ME PLEASE Dear vze4dphy, Okay, now this is not as straight forward as one might first think. There are a number of issues that can cause this symptomatic fault, and ...

...acer monitors are usually put together with 5 screws on the back of the monitor, 4 where you can see them and 1 under the pivot mount, this can be accessed by removing the pivot cover and then ...

...acer monitor model s230hl. The instructions are also for the S220HQL and S200HL models, I'm assuming the setup and bases are the same. I'm having issues getting the base onto the monitor ...

...Acer" logo, then "No Signal" appears on the screen. I then hooked up my LCD television that has a video port on it to the computer. There again, was no picture from the computer. The ...