...purge unit error. The purge unit like a spitoon to the printhead where is stops. There is a sensor in the purge unit; when it is blocked (usually by ink build up), that error is given. The error ...
Question about Pixma MP500 All-In-One InkJet Printer
purge unit. Try checking the purge unit for paper stuck in it. To say in detail ERR 6A00 is a Canon generic code for paper path jam. Some where in the paper path a sensor is activated indicating paper
...Purge unit sticking I have a Canon MP830 and I am getting a 6a00 error. I noticed the purge unit was sticking. I checked to see if something is jamming and saw no foreign objects. I took the printer ...
Question about PIXMA MP810 All-In-One InkJet Printer
...- Sheet feed unit - Purge unit - Logic board* Try to manually move print head at left position and then try torotate the gears of purge unit, if it moves (purge unit) switch off and on ...
Question about PIXMA MP530 All-In-One InkJet Printer
...purge unit being jammed with something and not being able to move. Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, ...
Question about MP610 Photo All-In-One Printer
...purge unit on mp610 canon? where is it located? the purge unit is located where the print head rest itself.. normally it's under the right side of the printer. You will need to remove the cover in ...
Question about PIXMA MP510 All-In-One InkJet Printer
...purge unit. You can remove the purge assembly and clean out all the ink covering the moving parts. You can clean it with isopropyl alcohol or just water. If no luck, replace the purge unit, will be ...
...purge unit, which is where the carriage (print head) stops on the right hand side of the printer. You may find that the ink has built up in the purge unit and it will need to be washed out in warm ...
...purge unit. You can remove the purge assembly and clean out all the ink covering the moving parts. You can clean it with isopropyl alcohol or just water. If no luck, replace the purge unit, will be ...
...purge unit is blocked,the purge unit is on the rigth if you open the scanner.You must unzip the printer to look at the purge unit.In the main part you need to replace the purge unit.If i have been ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
