Questions & Answers for: punch 401s

...Punch 401s starts then smokes I have a Fosgate Punch 401s I got from a friend that had a melted input jack from a loose connection. I put in bolts for the input and there are no shorts now and it has ...

...401s punch bridgeable Hello ronnieyannon, A single 4 ohm speaker wired to each channel, like you have them wired, presents a 4 ohm load. And it appears that you have them connected properly. The 401s ...

...401s Rockford Fosgate Amp. Not turning on. No power light. Pos+ and GR- are solid. Thought it may be remote, so tried running a wire from the POS+ to REM to test it, no luck After i got my car jumped ...

...Punch amp 401s. Transistors TC7,TC8,TC15,TC16 Type, NPN or PNP, wattage? rockford fosgate use hexfets.they are made by international rectifier and are available from toronto. they are n and p channel ...

Does the Rockford 401s amp have a fuse? Yes. Rockford fosgate has a cover over all of the connections, crossovers, and various other controls. Just remove the cover with the allen wrench they sent ...

what is the auctual watts fpr the Rockford Fosgate Punch 401S? rockford fosgate doesnt have watts its considered monoblock it gives off watever the speakers want....it gives them the power they need

can you run a single 15" 2 ohm woofer on a 1200 watt 401s? yea you could run a single fifteen it would be a good combination

punch 401s 1200 watts and the RCAs broke off the mother board what do i do to fix it If you have a soldering iron simply epoxy the jack down to the board and then take some wire and solder rthe center

Rockford Fosgate Punch 801X Car Audio Amplifier schematic all i want is the scematic 4 the inside You're not going to be able to get that - it's considered proprietary information and won't be made ...

What is the rms for the punch 401s 1200 watt amp Rockford Fosgate 401s 400 watts RMS x 1 bridged