Questions & Answers for: pump hotpoint wf000 washer

hotpoint WF541 fault cycle stops before drain, flashing light "MINI LOAD". CHECKED FILTER AND PUMP ROTATION- ok washer wont fill with water bad main control board

...light on machine will not go into next mode wash ? this for ahotpoint wf000 aquarius ,machine runs up to going into wash stage and prewash light starts to flash Check pump and filter for

...PUMP ON WASHING MACHINE HOTPOINT WF740P WASHING MACHINE, HOW DO YOU REMOVE THE PUMP TO UNBLOCK IT Remove the lower portion of the front panel. 3 screws. Twist the pump filter and pull to remove

hotpoint wf000 not completing final spin the programme starts as normal but when the final spin indicator light comes on. the machine stopps and the load is stil wet. it's as if the programme is ...

...hotpoint wf220 wshing machine which is not spinning the pump is working and the on/off lights and mini load lights are flashing i have a hotpoint wf321 water comes in and pumps out have flashing mini ...

...pump to hotpoint WF250 Can anyone advise how to fit a new pump to my hotpoint WF250 washing machine? I have been quoted £110 for the job!!! disconnect the machine hoses and all drain put it on ...

...hotpoint WF000. When I unplug and restart the machine on a wash, it'll run for a while before flashing the prewash light as well as the normal running lights. In this error condition the machine ...

hotpoint wf540 on off switch flashes and the machine stops and is full off suddy water. sounds like your water pump has failed?? Try cleaning the filter first, normally accessed at the bottom R/H side

...hotpoint washing machine, put it back together now it won't pump the water in, and the door lock light does'nt come on! any idea's wot is wrong? I would say you have missed a wiring connection ...

my hotpoint washing machine does not spin . it stops at spin cycle. Check the drain pump for lint blockage. If it does not pump out water it will not spin.