Questions & Answers for: Kenmore pump cap

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

...pump cap water is leaking from the screw cap on the reservoir for the water pump on my kenmore he3 front load washer. not sure if this cap can be replaced. is there a part number specific to the cap? ...

Ad

Question about HE2 Plus Front Load Washer

1 Answer

pump reservoir cap turns counter-clockwise to remove. You may want to review this link to assist you as well: http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front The advice in

Ad

Question about 46462 Front Load Washer

2 Answers

...pump cap. (You will get wet) Once you can remove the pump access cap, clean the filter out and check inside the impeller opening to see if it has any lint plugging it. Please let me know if I have ...

Question about Elite 45986 Front Load Washer

2 Answers

...cap has an open style handle, use a screwdriver to insert in the handle to give it the last turn to tighten. If you have questions, please let me know. I hope this helps. Was there a small rubber O ...

Question about HE2 Plus Front Load Washer

1 Answer

...you will find the pump. Built into the pump there is what looks like the gas cap to a car. unscrew this gas cap and clear the debris from the drain filter (gas cap) this should solve your problem. ...

Question about Elite HE4 Electric Dryer

1 Answer

...and clean. Remove as much water as possible from basket before taking off pump cap or else water will come flooding out when filter is removed. Reinstall and run drain spin cycle. Should drain

Question about 24032\24036 Top Load Washer

2 Answers

...cap covers have to be pulled off straight forward to gain access to the screws. 2: The newer style machines are now using spring clips that will need to be depressed with a thin bladed putty knife. ...

Question about 3.5 cu. ft. Front Load Electric Washer

1 Answer

...the front of the pump, then remove the cap on the front of the pump,clean out all the debris and wash off then line up the marks on the cap and housing to reinstall That's all there is to it.Good ...

Question about 3.5 cu. ft. Front Load Electric Washer

1 Answer

the cover cap firmly. Run a short wash cycle and check for any leaks at the filter cover cap. If the error comes back, you may need to replace your drain pump. Replace the kick panel if none are found

Question about 3.5 cu. ft. Front Load Electric Washer

1 Answer

...pump. Please note the machine is full of water, and when you open the filter cap, all the water will flow out. I am not familiar with Kenmore as we do not have this brand in Australia. However, with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machine Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...