Questions & Answers for: Bosch pump cap

...pump cap and clear out whatever is blocking the pump (lint/loose change etc. that might be stuck there). However, I cannot open the pump cap? I can turn it about a 1/4 circle and then it does not ...

...pump cap The message "Pump Blocked" was displayed and I followed the instructions provided in the manual to resolve. Although it has happened in the past and I was able to resolve the problem by ...

...PUMP CAP THE SPIN BUTTON WAS FLASHING SO IN ORDER TO CLEAN OUT THE PUMP, I TRIED TO REMOVE THE PUMP CAP. TO NO AVAIL. IN FACT IT HAS STARTED TO BREAK AND IS STUCK FAST. PLEASE ADVISE ON HOW TO REMOVE ...

...pump cap, there was a small amount of water and some congealed soap, turned the machine upside down,more water- came out-clear, took off inlet hose to pump, some soap and small amounts of black ...

pump cap wo't open and is leaking Hello....This problem is usually caused by debri within the pump filter body housing....thats the part to which the cap you speak about is secured to....you can try ...

pump cap turns but will not pul out. drain pump cap turns but will not pull out. had grips on cap,it does not appear to turn fully assumed cap has to be horizontal to pull out. Make sure that you have

...clockwise,the cap will come off and will expose the pump,also turn the pump plug also counter clockwqise and it will come off,remember get a flap pan under the pump.a bit of water will be coming ...

...cap does not fix the problem then your looking at a water pump/thermostat issue. Does it overheat at idle only or at any engine speed? Problem with those pumps is that if it has the plastic impeller ...

pump cap won't open? I followed the instructions to drain the pump, after the drainage hose was drained, I tried to open the pump cap and it has opened half way and it is jammed and won't let me open ...

...open filter to see if the pump is running. (You should see the pump impellor rotating) If the pump isn't running, let me know. If the pump is running, refit the cap and try the machine again. Good ...