G3 not moving or cleaning. Please advise. I used the Pool Pulse meter to determine proper amount of suction, and determined removing the FlowKeeper Valve put the Pool Pulse meter right in the middle, ...
Question about Baracuda G3 Automatic In Ground Pool Cleaner
Lots of suction, but G3 won't pulse or move around pool I have the barracuda G3, it's got plenty of suction, but now won't pulse or move...I've checked for debris and there is nothing... theres a ...
zodiac barracuda G3 isn't pulsing my zodiac g3 is attached to the skimmer but isn't pulsing and moving around the pool? I've adjusted the tension at the fitting but nothing works. Is there something ...
wont move,has suction but wont move? If cleaner is pulsing, you probably have a worn out foot pad and it should be replaced. If it not pulsing, you probably have a ripped or torn diaphragm and it ...
Question about Baracuda G4 Automatic Pool Cleaner Ne221
...checked to ensure that our pool, filter, etc were working properly and were clean. We used the pool pulse to ensure the right amount of water volume was flowing to the hose.We have a dedicated vacuum ...
...for a few minutes and then stops dead, not pulsating. The pressure feels good on my hand. Use Pool Pulse to ensure proper flow. It could feel ok on your hand, but you need very precise pressure to ...
...the suction or adjust the speed. When it does get going, it is very slow. You need to use the Pool Pulse feature to control the flow of water through the cleaner. Here is a brief overview, but if
...and top of pool, and won't stay on the bottom. Cleaner won't leave or rim of edge of pool. Use Pool Pulse to lower flow. Utilize return flow to move cleaner. Adjust hose weight. POOL PULSE (metering ...
how do I use pool pulse? From the users manual for these pool cleaners: The Pool Pulse is a flow meter that measures the volume of water flowing through your Zodiac cleaner. It must be used to ...
Question about Baracuda G3 Automatic In Ground Pool Cleaner
Pulse changes speed on baracuda as there are no real moving parts on the barracuda, the pulse is driven by the efficiency of the pump. if there is air in the system, the pulse will slow down. as the ...
Usually answered in minutes!
101 Questions
90 Questions
97 Questions
48 Questions
31 Questions
