Questions & Answers for: pully belt lose

Question about 2001 Discovery Series II

2 Answers

pully is giving the belt tension( it supposed to be about 1/2 of an inche to an inch or try to turn the belt around to almost half way) if not replace the tensioner pully. if good check the free pully

Ad

Question about First Edition FEW12 Front Load Washer

1 Answer

...belt on the moter first then the pully on the drum guide it one and spin the pully slowley and it should pop on MAKE SURE POWER IS OFF AND PLUG IS REMOVED THE MACHINE IS STILL LIVE IF SWITCH OFF AT ...

Ad

pully to tight en the belt is all the way and its still a little lose and sqiels at start up but seems to work ok new alternator and belt i think the belt is just not on the pullys right Hello, I hope

Question about 1994 Caravan

2 Answers

pully lose and the belt walked off, what i would do is check all of the pullys and makes sure there is no movement on any of them. more info would be nice!! Single serpentine belt? Might just be old n

Question about FEX831CS Top Load Stacked Washer/Dryer

1 Answer

...pully for the belt that drive the spin cycle has become lose and is causing the belt to frey because it is saging down. How do I tighten the pully mechanism? Remove the pulley from the shaft (the ...

Question about FEX831CS Top Load Stacked Washer/Dryer

1 Answer

...belt to go on pully, even after loosening bolt. Do I need a mechanic? the serpentine belt drive system has a tensioner pulley losing the bolt wont help you have to put to belt on as it shows on the ...

wrong belt or YOu need to check to make sure that you followed your pully map correctly if the belt is the proper one, and its on right. check for a bad belt tensioner. the spring on inside wears out

...loosen motor bolts, press teh motor down until belt is taught and retighten. Check first to see if their is soap on the  belt/pully/drum/motor carrying the belt as this could be causing it to ...

...It is not an electric problem! Cannot lose the ajustement for the pullies because the belt is falling! Thank you! fall do you have the belt on the proper side of the idler pulley? it may not

...belt on volvo s80 2004 can't break bolt on balancer keep spinning Hello. If you have a impact gun it will spin off , if not you can use a pair of vise grips and a leather glove. Put the glove around ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...