Questions & Answers for: Chevrolet Camaro pulley sounds

...sounds ok but still leaking and getting hot? IF THIS IS AN LT1 V8 ENGINE THE OPTI SPARK DISTRIBUTOR IS MOUNTED RIGHT BELOW THE WATER PUMP AND IF ANTIFREEZE GETS IN THIS UNIT IT COULD HAVE CAUSED THIS ...

...-lifter rocker,valve,valve spring,spark plug-wire -lower end/rod knock-bearing-wrist pin-piston/fan-pulley My trip odometer makes a similar noise. While driving, look down at the instrument cluster. ...

sounds like the timing chain cover is leaking coolant. i have a 96 3.8 camaro its leakin from a metal hose behind water pump it comes out of tentioner pulley and 90degrees into block can i change this

pulley Sounds to me like the bearing is out on your ac unit. This is a process unless you know what you are absolutely doing you may want to take in to a mechanic to get worked on These model Camaro's

car makes a tick sound at idle and gets worse when you give it gas. You need to release the belt tensioner and then turn and tug on all the pulleys and idlers that the belt runs on to see which on the

Tensioner Pulley is grinding Grinding Noise is coming from the front engine Remove the serpentine belt(s) and spin all the pulleys by hand. If one sounds loud, replace it.