Question about Wild Thing 18" 40cc Gas Chainsaw - P4018WT
...pull cord on Poulan P4018 chainsaw! I have a fairly new Poulan P4018 chainsaw that I took out to cut a small tree. When I pulled the cord to start it the pull cord did not retract. So I looked at the ...
Question about Wild Thing 18" 40cc Gas Chainsaw - P4018WT
...pull the cord snapped back after about 8 inches of pull and now I cannot budge the cord. Any ideas? try taking plug out to see if it turns then.if not take off pull cord assembley to see if something ...
the side of the engine and inspect the cord path--look for kinks in the cord or maybe it got wound on the spool incorrectly. It should be possible to pull it through while off of the engine. Good luck
Question about Wild Thing 18" 40cc Gas Chainsaw - P4018WT
...pull cord on my homelite weedeater is jamming and not able to pull it all the way... can't see anything that is jamming it and does not appear broken. Sounds like the cord is caught in a slot on the ...
...cord. It has jammed and does not come out or retract. It jammed half way through the retracting action. Cannot pull it out or retract. Would like to know how to open the canister to take a look for ...
...cord from the back of the product. If necessary, pull the input tray down to open it, and then lower the print cartridge door. Gently pull the paper out of the rollers. CAUTION: If the paper tears ...
Question about Photosmart C4180 All-In-One InkJet Printer
pull start mower, starter cord jammed Remove the top cover to your engine and any attachments. Check to see if the cord has jammed into it's reel. Also is the cord to long, or damaged. You may ...
...pull cord jammed Excell vr2522 with Honda GVC160 engine. Can't turn engine. Pull cord very hard, as if engine was jammed. Removed pull cord assembly, it turns fine. Was able to turn engine ...
Question about Photosmart C4180 All-In-One InkJet Printer
...cord jammed The retractable cord in the vacuum is jammed. The release button will do depress and the cord will not pull out or retract. go and buy it from www. repairclinic.com God bless ...
Question about Photosmart C4180 All-In-One InkJet Printer
...pull cord won't release, to start engine. if you cant pull it possible engine failure or debris in recoiler --check and inspect pull cord --remove plug and try to pull if engine turns it was air ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions