Questions & Answers for: ptc Freezers

...out correctly. I examined the overload and it looked like it was good. I measured 20 vac at the PTC Starter. I am tempted to buy a replacement PTC Starter Relay, but for $58 that's taking a big ...

...OFF could be a bad compressor or a bad compressor starter, I would first replace the compressor ptc ( starter) , if still problem then its a bad

Chest freezer, stopped freezing, Ptc relay attached to compressor has overheated to point of partially melting. Some of the PTC relays just give out for no apparent reason. (the brown ones more than ...

for about 3 seconds and off for about 10 seconds. there is a chance that your over load and starter ptc has gone bad. the worst case your compressor has gone bad

...should have have let it sit till the compressor equalize if it was running,you may have ruined the ptc overload relay that protects the compressor,try unplugging it and leave it off for an hour,then ...

...1. The compressor is running slow due to the rotor dragging on the compressor stator. 2. The PTC relay contacts on the compressor are getting hot and the compressor is shutting off before the ...

10* this is a 404a unit http://www.totaline.com.ar/site/uploads/file_7-200652412174-0.pdf Here is a PTC with all of the refs

...electricians at work suspects that there is a switch stuck. Please advise. Thank you, Ian its the ptc overload relay on the side of the compressor body,it aids in starting the compressor by ...

fan blowing warm air food not freezeing the ptc overload/relay on the compressors dead so the compressor cannot start,therefore the unit cannot cool,replace the ptc and it will run again

...TO TOUCH CAN ANYONE HELP WAS WORKING BEFORE IT WAS UNPLUGGED AND MOVED TO NEW LOCATION. replace the ptc overload/relay on the compressor and it will cool ...