Questions & Answers for: pt51hx41e

PT51HX41E PANASONIC picture comes on the after 5sec or co turns white. I know it has been about a year since you posted but I was wondering what you did about your Panasonic? I to have one that has ...

...channels (through cable). The HD channels still have the red ghosting problem. My TV is a Panasonic PT51HX41E Are there other Resistors/caps/fuses that need to be replaced? Thanks in advance Hello, ...

Panasonic PT51HX41E Resistor values What are the values and wattage of the rseistors that need replaced around the STK-392-110 and how many ? you probly wont have to replace any resistors ,use ...

Panasonic PT51HX41E has a "double image" or red shadow around the images. Suggestions?Thank you the covergence ic;s are faulty

...I have been trying to figure out a place to purchase the feed resistors for the STK's on my PT51HX41E. They are the 2.2 ohm units at R7048 etc. Worst case, what is the Panasonic Part #?

Need to know what convergence chips are in Panasonic PT51HX41E Anyone know the type of convergence chips are in a Panasonic PT51HX41E? Thank you very much your model has two STK392-110 CONvergence Cs,

Panasonic model PT51HX41E Blue is not converging, Red and Green perfect. Blue Lines move but will not converge have replaced STK392-110 checked all resistors. What could the problem be. have u tried ...

I have a panasonic PT51HX41E and have convergence problems. Red and blue move in all directions, but green is very warped vertically but not horizontally. What parts would I need two STK392-110 ...

my panasonic pt51hx41e convergence will not line up Clean the projection lenses with qtips and alcohol. Then try to use the convergence function. My blu was messed up on one side of the screen until I

Panasonic PT51HX41E blue wave at bottom and top left double letters.. convergence failure. You can get the repair kit for your model which contains the parts and the CD with instructions at the ...