Questions & Answers for: Shuttle ps one

...had pressed the ON button. Checked power supply voltages- all seemed ok. Supply comes on if I short PS ON ( green) atx pin to ground; if I remove the ground, it goes off. I checked the switch for ...

...board ready for the scrap heep? If this is a new build it sounds like you need more watts from the PS. You didn't say what your spec were...specifically the PS and graphics cards nor did you mention ...

.... put the 7600OC back in... Same thing. I'm currently running a 1x core 1.8 AMD Athlon XP, 450 Watt PS, 1.5G (was 2G) RAM, and as mentioned before, an nVidia 7600OC. I am completely stumped at thhis ...

...very much appreciated. Many Thanks Ted tnielsen u did not said ur mother board vander name and chipset. because some mother board can not star if CMOS battery expire. remove CMOS battery check it ...

...en&q=fsp250&um=1&ie=UTF-8&cid=6955864153062084941&sa=X&oi=product_catalog_result&resnum=2&ct=result#ps-sellers Hope this helps. Jeff Contact with Shuttle confirmed that the power supply was the ...

Mainboard does not recognize the PS/2 mouse The mouse has been connected to one of the serial port connectors from the beginning. There is no indication that anything is wrong except the mouse no ...

My SB77V10 will shut down without warning. The PSU has been replaced with a KDM MFX9300. If I enter CMOS setup, the box will remain powered up, however after exiting CMOS, the PC will power itself ...

...bough a shuttle sh67h3 with 1155socket and i have the v2 motherboard I upgraded the default PS of 300w to a new 500w PS I then put in my gefocre gt 730 with 4gb of vram and put in 16gb of ram