Questions & Answers for: Foxconn ps one

...ps/2 problems After 2 RMA's i finnally got my board to work. But, now when i try and boot with a mouse plugged in it will not boot at all. This can be easily fixed by using a usb mouse and is not a ...

...PS/2 USB0 : USB - None / None USB1 : USB - None / None Performance Tips Notice N224 : SMBIOS/DMI information may be inaccurate. Tip T2536 : System has no SMBus/i2c/BMB bus support. Tip T2 : For more ...

...one minute from boot up. hi buddy! what kind of motherboard you have and ill give you a easiest way how to connect ok thnx. PS: pls rate me if my solution solve the issue and you need more further ...

ps-05 and gtx 9800 xt i cant see an image on the monitor. though i think the problem lays on the graphics card and an incompatability issue the ez cool psu! what i want to know is what the beeps meen?

PS/2 Keyboard not Working I just had a 761GXK8MB (with Athlon 64-bit CPU and new power supply) installed into a Dell Dimension chassis. I tried using a PS/2 keyboard (two different ones) along with ...

...one to get first is the power button Pin. The rows are two pins up and say 10 wide. Now, on my Giga byte Mobo, it has printed in tini, tiny little letters, just below the pins, PS for power switch, ...

can foxconn g33M02 handle 500watt psu? and what nvidia geforce 8 series will work on my mobo? Nvidia Geforce 8 is PCI-E Card. Here are the list. This were all best and good to your MOBO. Core Clock ...

...modules and install one at a time to test. Also, if your keyboard and mouse have PS/2 connectors (round, rather than USB), be certain that they are connected correctly to their ports. Hope this

...to run the one you're having problems with, consider swapping them out. Though it could be *********** board, it would be easier to swap PS's and see if the issue goes away. If not, it may be your

...PS/2-connector This configuration should be sufficient as test platform prior to installation into a chassis. So, I'm short cutting the power pins, the CPU-fan is running and I'm getting a single ...