ORANGE FLICKER ON POWER LED i each i press the on button, a small, orange flicker appears. I am wondering if anyone has a solution. Suggestions are helpful. P.S. monitor is around 4 years old :\ Is ...
...button just blinks a yellow light. Blinking yellow/amber light indicates PS not operating within specs. You can look at replacing the PS but might need to find out if something else caused the PS ...
...PS (~$79-99). GL I recently had a problem turning on my XPS 200. Then I fixed it by placing my right index finger in the slot and behind the on/off button. Then used my left index finger to push the ...
...PS-5022-2DF Power Supply Switches itself off after only a second or two I cannot test it due to not knowing how the power button is looped through the board. any help would be accepted Bryan When a ...
Question about SK-8125 Keyboard
...ps/2 plug. I down loaded driver, pluged it in, and all seemed to work. When I tryed to enter the set- up program with the F2 button, nothing happend. I was plugged into a USB 2.0 PCI card port. I ...
Question about Dimension 2400 PC Desktop
..... thanx ? Dimension 2400 power button wires are detatch .. where do i re attach them ??? the connectors are labeled.power switch is labeled PS.reset, RS.you can reattach them by following the
Question about Dimension 5150 (DIM515MIN) PC Desktop
...PS (power supply), or the supply may becoming old. One day when the button no longer works you will need to replace the Power Supply (or the button?). If you need assistance when doing this I can ...
Question about Dimension 5150 (DIM515MIN) PC Desktop
...buttons under eneath do not work the trackball and buttons under neath do not work Is that a USB or PS/2 mouse? If that is a USB mouse, try connecting it into anotherUSB ports of the computer or try ...
...button in the center of the control panel on the printer. I have 192M of memory in mine, and haven't ever hit the out of memory error, and I use the PCL driver not the PS one. Is there something ...
...mouse can be found on Amazon and eBay for very little cost. The model you have posted has a PS/2 connector. There are still other mouse that are made with the PS/2 connector, if you need
Usually answered in minutes!
2,767 Questions
2,074 Questions
1,822 Questions
1,740 Questions
1,432 Questions