ps2 keeps shutting off Just replaced the laser for a new one, the problem i have now is when i shut the lid the system turns off. Hi loonyhouse ! It sounds pretty odd. You should take the ps2 apart, ...
...ps2 laser after that the discs are not spining ps2 version is scph 70004(CB) should i change the lens will it work or not please tell me Don't bother changing the lens. If i understand you correctly ...
Question about PlayStation 2 (PS2) Console
...PS2 OFF AND CLEAN THE LASER EYE WITH A COTTON BUD DONT PRESS ON HARD AS THIS WILL DAMAGE THE PICK UP BLOCK AND SCERATCH THE LASER EYE HOPE THIS HELPS YOU PLEASE DONT USE ANY WATER OR CHEMICALS ON THE ...
PS2 Slim does not read disk The PS@ Slim does not read any disk and if it does I will freeze in a short period of time. [email protected] Check this Solutions, Check temp of console, if ok ...
...ps2 you have some time to realize the laser is bad since the machine start not reading well or freezing during the game.On ps3 the laser stop working and that`s it. I suggest to replace laser or try ...
ps2 slim is not reading a dvd and cd.. took it apart and noticed on the dvd it would turn in very short intervals and the laser would work up and down and make a clicking noise. After turning in short
...PS2, clean it, and how to adjust the laser eye. It works great now except our Rock Band 2 disc must be damaged because we have 4 songs that won't load. I suggest trying adjusting your laser eye (if ...
...PS2 Slim. The red light comes on and when I hit the power button the green light stays on for only a second then goes back to red. Any help to fix these problems would be appreaciated as I would hate ...
Question about PlayStation 2 (PS2) Console
...PS2 can't read the disc because the laser isn't tracking the surface properly, the best hope is it's a dirty lens, that cures it in many instances. Sometimes there are multiple issues and the dirty ...
...PS2 LASER AND TRAY BUT I'M UNSURE BECAUSE I DON'T KNOW IF IT IS JUST TO OPEN THE PS2 SLIM AND TAKE OUT THE 4 SCREWS TO TAKE OUT THE WHOLE LASER AND TRAY AND JUST PUT A NEW ONE THERE AND CONNECT THE ...
Usually answered in minutes!
27,926 Questions
21,069 Questions
11,924 Questions
9,005 Questions
5,602 Questions