ps2 eject ribbon how, or where do you reconnect the eject ribbon to the main board? is this ps2 slim or original if its the original ps2 look under the disc tray and you should see to white ribbons ...
...to turn console on?? Try pushing the eject button to see if the power button is faulty. If the PS2 is off and you press the eject button, it automatically turns the PS2 on and ejects the DVD
Eject/reset cable I recently wanted to clean my ps2 cd lens in the hope of stopping dre's. somehow or another my girlfriend managed to pull the eject/reset cable out and i cant see where it was ...
PS2 power ribbon on eject/power button Hello please help me bcuz when i opened my PS2 i accidentally pulled the top cover so the power ribbon is pulled and disconnected. How Will i ever put it back? ...
ps2 and tried to clean the lens but that hasn't worked and i tapped the inter core and it whenever i push the eject button it would blink for a long time ejecting and injected twice each. I'm not sure
...eject, screen goes black and no signal through port to guitar. but when i shut off the ps2 and unplug the controller reciever, turn system back on with a different wireless controller(same game) it ...
Question about PlayStation 2 (PS2) Console
ps2 cd tray does not open and the eject button light flashes when you switch the playstation on the eject button light continuously flashes green and the disk tray does not open This is the tray ...
...PS2 power and disc eject button do not work. There is a tape that came loose from somewhere that goes to the power and disc eject button but I cannot figure out where it is supposed to attach to. if ...
Question about PlayStation 2 (PS2) Console
eject button pressed on ps2 The disc tray motor needs to be replaced. You can find one on ebay. A relatively easy fix. Good luck! Does the eject button light up? if not check the cable if it does then
Usually answered in minutes!
27,926 Questions
21,069 Questions
11,924 Questions
9,005 Questions
5,602 Questions