Questions & Answers for: Brother protruding ears

The paper is jamed with it protruded out in front about a inch The paper is jamed with it sticking in front. Ihave no way to release the rollers to pull the paper out without tearing and lose it ...

Clutch Release Problem Model #XL2022 When I could not 'release knob' by turning toward me, to wind bobbin, I loosend the small screw on the knob. Threaded bobbin, but it is messy, and now cannot ...

typing wrong letters on Brother SX-4000 How can I align without buying a new wheel as the typewriter is only 1 1/2 years old. Try hitting [CODE] + [RESET] at the same time to reset the cartridge. Make

originals are dog earred when come out of sheet feeder when I copy or scan and use the automatic sheet feeder my originals come out dog earred at the top. - both corners the same. open a top cover and

bobbin don't turn the bobbin stop turning In the shuttle area there is a silver round piece- called the shuttle race cover. It has a black ear on the right and a black ear on the left. Push the right ...

...to be done after the daisy wheel, correction tape or ribbon is replaced.) The daisy wheel has a protruding ear that should be on the top right. To remove, open the cover, pull the lever towards ...

...the daisy wheel lock. 3. Remove the cassette daisy wheel by pulling it out of the machine by the protruding "ear' on the top right. 4. Insert the desired cassette daisy wheel into the slot and ...

...the daisy wheel lock. 3. Remove the cassette daisy wheel by pulling it out of the machine by the protruding "ear" on the top right. 4. Insert the desired cassette daisy wheel into the slot and ...

...a broken sensor or a broken sensor needle on the cover, open the adf cover check under it, there a protruding plastic(arrow like) that presses the sensor whenever u close the adf cover,check for any ...

WHAT DOES THE BOBBIN CASE LOOKS LIKE? dOES IT HAVE ONE EAR OR TWO? BrotherXL 3500 this is what all of mine look like