Questions & Answers for: protect mode kenwood kdc mp235

protect mode and will not come out no matter what I do...I have tried grounding it in another spot and for some reason when I touch the ground wire to the bolt I am grounding it to it sparks....please

protect mode is on I went to turn on my vehicle the other day and my stereo says protect..I can not get it to play...any suggestions into making this work? look under the volume control knob and ...

protect mode and i cant get it off how do i get my kenwood car stereo off of protect mode Look on the face plate for a really small hole. Put the tip of a pen in the hole and hold it for a few seconds

...Protect mode. Cant get it off One day it randomly decided to go into protect mode. I dont have any of the original papers. How can I fix this? Common Kenwood Security Codes Many Kenwood radios are ...

...protect mode. First press the reset button (tiny pinhole button). If the unit comes back on saying OCER then most likely there is a short or a grounding problem with the speakers or speaker wiring. ...

PROTECT MODE - HOW DO I RESET RADIO? first, make sure you don't have any shorted speaker wires or bad speakers. to reset it there is usually a pencil tip sized hole on the face with a switch behind it

...protect" mode. The only way to get the code is to call the manufacturer with the product number and serial number, generally they will verify your identity and then provide you with the unlock code. ...

...protect mode? (kenwood kdc-bt 742) Please see my tip at http://www.fixya.com/support/r9389300-stereo_says_protect_or_clicks_off_when . These are generic instructions. If you get stuck or needspecific ...

...Protect mode is a special condition that kicks in when an internal fault has been detected. In protect mode all the unit function are disabled to prevent the stereo getting more damage in consequence ...

Kenwood KDC-4051 in protect mode push reset pin on front of face with a pin while vehicle is on.