Questions & Answers for: proscan vcr turn

...VCR's which work well with commercially recorded tapes, but have noise, especially at the bottom of the picture (which won't track adjust out). This Proscan is the only one which plays my old tapes ...

...PROSCAN PSVR73 VCR plus gold, VHS HQ that worked fine until I got cable the other day and tried to do the set up on the VCR....it said it would take hours and when the LCD read out of DOWN LOAD ...

...Proscan 11447, 10047, 11347 , 10466,10747 FOR DIRECT TV REMOTE Programming a Device using Code Search: FOR RCA REMOTE Manually turn ON your device (TV, VCR, Cable Box) Press and "HOLD" CODE ...

proscan vcr plus gold stuck in lock cannot get out of lock position to record I just had the same problem and found a solution on the internet that worked. Hopefully you still have the VCR's remote ...

...vcr i have the proscan psvr65 and when i turn on the vcr it says "lock" and i can't do anything with it and theres a vcr tape inside and it won't eject out either and i have even unplugged the power ...

...Proscan 32LB30QD does not have Audio Out! Is there a way to connect a wireless headphone to this TV? You can either see if your cable box (if you have one) has RCA outputs on the back or if you are ...

proscan vcr model psvr71 is in lock mode following directions in manual won't unlock it, is there some way to get it out of the lock mode other than what the manual tells me to do ? I read the user's ...

when i plug my vcr in it doesnt turn up on the tv chek the cable between TV and VCR

...set made around 2000 but if it is your model here is some information to look at. http://en.allexperts.com/q/TV-VCR-Stereo-1749/Proscan-PS50700-projection-TV.htmIf not this model let me

...Proscan VCR Codes = 3000 ON MOST REMOTES: 1. Turn on the TV. 2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light. 3. With the button lit, point the remote at ...