Stuck in standby mode Just installed a replacement bulb, hooked up power & media feeds. Two LED red lights come on steady, press on botton and NOTHING happens, no light, no vent, NOTHING. Help Please.
Question about LP 580 Multimedia Projector
stuck on standby. says it's colling down but never turns on. the temperature sensor may need replacing. if the problem persists, there is an issue with the main board. unfortunately, there are no ...
stuck, the unit will light and then shut off. Also, depending on the age of the projector, if there isn't a green wire going from the front of the main board to the bottom of the power supply ballast,
...stuck in standby mode. The orange light illuminates immediately when the power is turned on. The bulb was just replaced. the power supply needs to be upgraded which involves soldering a wire to the ...
...thing that is scanned by the uProcessor are the fans. If one is not turning, because the old lamp exploded and the glass is stuck to the blade, the standby lamp will just flash. Check all of the
Question about ELPLP69 - V13H010L69 Projector Replacement Lamp - Bulb for EH-TW8000 EH-TW9000W Powerlite Home Cinema 5010 5010e Pro Cinema 6010 3D projectors
...projector is stuck in start up mode When I turn on the projector, it stays in "warm Up" phase with the light flashing under the "on Button". The windows that normally open so the ...
Question about ELPLP69 - V13H010L69 Projector Replacement Lamp - Bulb for EH-TW8000 EH-TW9000W Powerlite Home Cinema 5010 5010e Pro Cinema 6010 3D projectors
stuck standby mode Some kind of background information would help, beyond three scant words that describe the very barest bones of your problem, particularly as we can't guarantee on this site that ...
Question about ELPLP69 - V13H010L69 Projector Replacement Lamp - Bulb for EH-TW8000 EH-TW9000W Powerlite Home Cinema 5010 5010e Pro Cinema 6010 3D projectors
stuck in standby mode since a power outage My Pioneer PDP508XDA is stuck in standby mode since a power outage try unplugging and then hold the ower button in untill all lights go out. plug back in and
Question about ELPLP69 - V13H010L69 Projector Replacement Lamp - Bulb for EH-TW8000 EH-TW9000W Powerlite Home Cinema 5010 5010e Pro Cinema 6010 3D projectors
...projector is stuck in standby with the red lights on, I have tried unplugging and re plugging with no change , it remains off I could fix it, if I had it. I do electronics. When you find the right ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions