Questions & Answers for: projector light keep turning itself

Question about TLP 261 Multimedia Projector

1 Answer

projector lamp keeps cutting out after about 2 minutes when it seems to be at full brightness. The lamp is working fine and then after a short bit of time it shuts off and the lamp LED light turns red

Ad

Question about PLC XU33 Multimedia Projector

2 Answers

...projector - warning light Hi we have a new ( 2 week old) projector. When we turn it on the green light appears and it seems to be turning on. After about 15 seconds the warning light appears and it ...

Ad

Question about 2300MP Multimedia Projector

2 Answers

projector keeps turning off When i turn the projector on it only comes on four about a minute until the temp lights go amber and it turns off, the fan is working but the air coming out is a little ...

Question about 2300MP Multimedia Projector

1 Answer

projector keeps turn itself off When i turn the projector on it only comes on four about a minute until the temp lights go amber and it turns off I have a Dell MP2300 with a bad power supply. ...

Question about 2300MP Multimedia Projector

1 Answer

light turn off at the same time? you have a power supply problem. if the fans stay on when the lamp is off, you need to clean the dust out of your projector because it's overheating. dust keeps in the

...projector keeps shutting itself off we keep unpluging it and it comes back on but immediately turns back off. when it turns off the light in front of the lamp button comes on. what is wrong? It is ...

Question about PT-AX200U Projector

1 Answer

projector turning off 5 min into the movie then had to cycle the power ,red light turns on and cant turn it on with remote . now turns off about 6 times durnig a movie having to cycle the power switch

...Projector keeps shutting itself off about 5 seconds after turning it on. The On/Standby light stays completely off for about 10 seconds then turns red again (meaning ready to turn on). Keeps going ...

...light sources. Move these items away from the projector to see if it resolves the problem. 3. Faulty power button or control board: It's possible that the power button on the projector or the control ...

...projector. Ambient light interference: If the projector is exposed to too much ambient light, the autofocus mechanism may not be able to properly detect the image and may continuously move in and out ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...