...lamp turns off My Dwin transvision 3 is about 3 years old. After about 45 minutes the picture becomes unstable, flashes and gets unclear. If we turn it off, then on again, the picture is fine for a ...
...Dwin is about 4 yrs old and suddenly it powers up for about a second or two then turns itself off...lamp never goes on?? is this what happens when we need to replace the bulb or do you think its ...
...PROJECTOR STOPS WORKING IN 5 MINS, FIRST PICTURE GETS FUZZY AND NO PICTURE BUT SOUND STAYS ON, I ALREADY PUT NEW BULB BUT SAME THING it's time to clean it out. the colorwheel might be going and if it ...
Question about TransVision 3 Plus Multimedia Projector
...projector and a blinking green light on the front of the processor. The bulbs do not always look broken when dead. You say it is used often. The life of a bulb is around 1400 hours I believe. This ...
Question about TransVision 3 Plus Multimedia Projector
...lamp on a ceilling mounted Dwin trans 3plus projector. is there a manual showing this. It is fairly simple. Take the unit down as you need to get to the underside. There you will see the retaining ...
Question about TransVision 3 Plus Multimedia Projector
...projector lamp will not light even after changing the bulb. It also looks like Dwin went out of business. Any options to fix? Call Interlight @ 219-989-0060 and read them what the part # is on the ...
Question about TransVision 3 Plus Multimedia Projector
...projector, they work for the service people. wonder if the dvi cable is fried. thanks, Steve Have you considered checking the lamp? It could be going bad. I had a similar problem... mine would work ...
...projector and receiver. Worked great and lamp well lit. Began smelling like something burning then pop and smoke. We opened the projector up the bulb in tact not blown. Scraps of paper inside unit as ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions