Questions & Answers for: Dell projector fuse

fuse just where in side is it located if you follow power cord inside the projector it is supposed to be first thing in the way of power cord(take care to remove power cord from the wall outlet first.

...Projector will not turn on. Is there an internal circuit breaker or fuse? If not what would be the most likely cause? Check that lamp cover microswitch closes (clicks). This microswitch disables the ...

just replaced lamp with brand new part, does not light up. unit will turn on, no projection, then shut itself down and "lamp"light comes on. anything i missed while replacing lamp to re-set, or is the

projector keeps turning off keeps shutting off randomly. At first every couple minutes then after a while it may stay on for up to 8 minutes. The fan appears to be running but is it overheating or ...

...the blub twice and we are still getting bulb error http://www.retrevo.com/support/Dell-5100MP-Projectors-manual/id/575bh227/t/2/ manual above. Also check, the Thermal Fuse, some have a little ...

my dell projector 1800mp is not powering up. No light comes up at all after plugging to outlet The first possibility is the projection lamp itself. Since you have not mentioned about the hours used on

..., no power up ? Problem : No power Solution : Check the main wire from the wall to the projector, if are good take it apart and check for a blow fuse in the power supply area. Please rate my ...

...fuse, if there is one on the body of the projector in a user-servicable location. This would either be a barrel type holder which needs to be unscrewed or a pop-out cartridge type. It will be in the ...

...projector won't turn on. Does anyone know a fix? have you changed the lamp recently, or cleaned the air filter. The internal fuse may be blown, or a whole lot of other things may be wrong, so we need ...

power supply fuse HI, Do you need to know the rating of fuse used in the power supply. Or do you mean that Power supply is not working.