...projector has 87% bulb life left, however it is so dim that you can barely read the screen. The various brightness sections in the projector menu don't make a big enough differance. Another projector ...
dim pisture lt2200 projector If the picture is dim with no distortion then replace the lamp.Usually when the lamp is used for around 2 years it starts to have dim picture before it stops working or ...
...dim I recieved a projector lamp VT60 lp and after replacing it, the image is simply too dark. Brightness control on the projector doesn't help. This usually means that there is some contamination in ...
dim This projector is high time @17000 hrs but otherwise all fuctions work as per design HELP!!! I had this same issue and it was the bulb. We had 2 of the NEC LT265 projectors so we swapped the bulbs
projector is almost brand new, only about 15 hours of use, yet it's used in the tropics where it is hot and humid. projectors really don't like hot and humid. they love cool and dry. if the colorwheel
NEC VT 480, replaced new lamp ,still low brightness. After replaced lamps,reset lamp working hours, filter working hours, still low brightness, picture Dim. if you remove the lamp, inside the lamp ...
How you can fix blue light problem on NEC projector? Shahid what does the blue light problem look like on the screen. is it all over the screen, or small dots, or a dim haze etc?
Question about LT245 Multimedia Projector
...dim compared to the others even though all setting are the same. How can I correct this? check the lamp of the projector. around the filament of the lamp, you might notice dark corrosion building ...
Question about NP100 Projector
Need to adjust the brightness. The projection is too dim to see clearly in a classroom. Checked the manual and it says to use the arrows to adjust brightness, but doesn't seem to be working Appears ...
Question about NP100 Projector
...Projector and the picture was real weak and dim, so I ordered a new lamp and put it in and still the same problem. Install a new lamp housing into the NEC M300W projector, gently pressing the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions