Questions & Answers for: Woods programming

...time is set Program preview > First I suggest you write out your schedule to avoid conflicts in programming Manual says: >For each ON time, you set DAY HOUR and MIN >For each OFF time, you ...

...timers require back-up battery to be fully charged before display will show Back up battery allows programming while timer is removed from receptacle After timer is programmed, plug timer back into ...

...Clock button and time is set Program preview > Have your schedule ready to avoid conflicts in programming Manual says: >For each ON time, you set DAY HOUR and MIN >For each OFF time, you ...

...to do. So without feedback, it's hard to say where the problem is for sure. After looking at the programming steps myself several times, I believe the most confusing part is the 'blocks of days.' ...

...same days for OFF that you chose for ON Press program button and program2 ON displays etc. To exit programming, press clock A conflict in programming will cause timer not to work as expected Make a ...

...2 ON" displays. This is program2 ON. Repeat steps above to set ON and OFF time for 5 programs. When programming is completed, press CLOCK button to exit programming. Press ON/AUTO/OFF button until ...

how do i remove an event from programing Removing event from programming is dependent on brand and model number of timer. Identify timer and then add a comment. Some timers are reset by unplugging ...

...to program 2 lamps to go on and off each day of the week. Might be a 2-channel timer with separate programming (some older timers offered this but most modern ones do not), might be a timer with 1 ...

.../ 8,3A ballast FEATURES: • Up to 7 different programmable ON/OFF cycles, cycles repeat weekly. • Programming fl8xibilify: u8hts fun on/off automatically at sunset/sunrise, or at any programmed ...