Questions & Answers for: program channels

Ad

Question about HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator

2 Answers

...program freqs into al the available channels, expect to hear that "constant tone" on any unprogrammed channels. The channels that you hear a tone on do not have a freq programmed into it. Its normal. ...

Ad

Question about HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator

0 Answer

...is what the automatic program channel feature is for. Auto-programming cannot select channels it can't detect. You may have to select manual programming and step through and set each channel

Ad

Question about BC248CLT Base Scanner

1 Answer

...channels are easy to program and use. 1. Press MANUAL 3 MANUAL with 3 being the number of the channel you wish to program. 2. Enter the frequency for that channel (e.g., 162.55) followed by ENTER. 3. ...

Question about 27GT271 TV

1 Answer

program the channels on my television. When I hit the menu button and select autoprogram, it says the channels are deleted or erased. Therefore none of the channels are programming with the television

Question about 27GT271 TV

1 Answer

...program the box to switch channels. This feature is used in conjunction with timer recording on the VCR. You still always program the VCR to record on channel 3 (4), but now the box can be programmed ...

...program it into another bank, press the desired bank key. The lowest open channel appears on the display. 2 screens alternate to indicate that open channel is available to be programmed. The scanner ...

PROGRAM AFTER ALL LOCKOUT OF ALL CHANNELS ON A BC60XLT-1 SCANNER I have locked out every channel, no channels scan. I have the manual and have tried to program following the manuals instructions I ...

Question about 26HF85 26" TV

1 Answer

program my channels Hello Your Toshiba tv can be automatically tuned to all stations. The procedure follows. Programming channels automatically Your TV can automatically detect all active channels and

Question about REGZA 42 in. Flat-Panel LCD HDTV

2 Answers

...an external antenna, and set it to autotune. ? You must configure the ANT/CABLE input source before programming channels (-left-hand column). ? If the ANT/CABLE input signal type is set to Cable, the ...

Question about REGZA 42 in. Flat-Panel LCD HDTV

1 Answer

...program channels you can program channel either in the remote control or in the tv button panel. press menu then go to manual fine tune so you can program the channel one by one. you can use the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1664 Answers

Brad Brown

Level 3 Expert

18626 Answers

Tom Chichester

Level 3 Expert

61659 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...