Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
U6439-900 will not turn off by the level in the handle. I have removed the ahndle and the switch seem to work fine. Re-installed the handle and it wirked for a couple of time, however, once the ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...Hoover WindTunnel Bagless Canister Cleaner with Powered Nozzle. The belt that spins the Brush keeps slipping off. I've replaced the belt, knowing it may have stretched, and it keep slipping off. Upon ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
How to replace fan impeller on old Hoover upright. Taking off the belt pulley is giving me the problem. Depends on how old it is ... if it is real old try putting a open end wrench on metal belt pully
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
hoover windtunnel self-propelled vacuum is not suctioning, changed belts, new bag what is the problem and i have checked the hose. have you cleaned the filters?
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
hoover mdl u6459-900 and the brush will not i have hoover mdl U6459-900 and the brush will not rotate even though the main pulley belt is rotating. i have changed booh belts and this did not solve the
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
hoover windtunnel self-propelled - will not turn on hoover windtunnel self-propelled. will not turn on, has no power - ???? You probably need the switch replaced. It's fairly simple to do youself, and
...belts. One belt is torn, assuming that is a problem :) where is the best place to purdchase a new belt? we hae a U6437-900. That is the problem. You can get the belt you need here: Hoover Vacuum ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...it is put against the resistance of the carpet. You simply need to replace the belts. Here are the (2) belts you need and the manual with instructions: Hoover self-propelled windtunnel belts ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
the problems but I can not figure out how to remove the knobs. Besides, I am not certain if this is the problem. Do you have the instructions? Thanks HERE IS THE MANUAL > http://hoover.com/file/500
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
problems with over heating is coased by blockages in the pipes, the main one is behind the brushbar take the sole plate off and there's a suction pipe that is normoly the one that's blocked ,hope this
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions