Questions & Answers for: probe light

Question about Profile JGS968SHSS Gas Kitchen Range

2 Answers

probe light The display is alternately flashing the probe and the bake light. The probe is not connected. I unplugged the stove overnight but the problem returned after plugging it in. I had the same ...

Ad

...Probe Air Bag light is on 1994 Ford Probe Air Bag light goes on and flashes 5 times then goes off Common fault on FORD Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the ...

Ad

Question about SEC272BPSS Electric Double Oven

6 Answers

probe light stays on so I can't cook After calling an authorized technician and the thermador support line, neither of which solved my problem, i was told a HARD RESET of the PROBE is all that is ...

...probe airbag light flashes three times then 94 probe airbag light goes off after ignition after approx 1 min light flashes three times then twice in a continous pattern when the car is running any ...

Question about 2002 Grand Am

1 Answer

...light up the probe on BOTH ends of the fuse. If the probe only lights up at one end of a fuse then that fuse is faulty and should be replaced. If the fuse does not light up at either end of the fuse, ...

...Check fuse panel for blown fuses and check trunk wiring for cut wire and check tail bulbs for blown light. My dash lights work on my 94 probe but not the fuel, rpm, temp,or oil but lights up any ...

Question about Profile JGB900 Gas Kitchen Range

2 Answers

Probe light flashing, oven won't bake. I have a GE JGB900 series range and the "probe" and "bake" lights are flashing and the oven won't start up. We don't have

Question about Profile JGB900 Gas Kitchen Range

1 Answer

...washer reservoir low-level light Windshield washer reservoir low-level probe is kaput, and low-level light is on all the time. How do I replace the low-level probe? Replace the probe and check ...

Question about Profile JGB900 Gas Kitchen Range

2 Answers

sides of the fuse holder. The fuse is bad if it lights on one side only. If both sides fail to light the probe either the circuit is off or you are too well insulated from ground for the probe to work

Question about Profile JGB900 Gas Kitchen Range

2 Answers

...light and probe both ends of fuse for power. Hope this helps Mike First check the drivers manual to find the fuse for the tail lights. turn the lights on , probe each of the fuse holder must be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...