Questions & Answers for: Bernina probability

...winder functions OK but the needle bar is not going up and down and is just free to move, the probability is that the basting solenoid has tripped the needle bar drive and that there's some ...

My Bernina Bernette 65 manual does not show how to oil it- do I need to? If there is no oiling mentioned in the maintenance part of your manual then your machine probably has nylon gears and maybe an ...

The lighted screen on front Of 1530 Simplicity Bernina does not work How to fix it? If the screen is not lighting, then a computer component is probably malfunctioning. Probably best to take it to ...

Model 930.Why is presser foot not lined up correctly? needle is hitting the needle plate. Is your needle position centered? The round dial on the top right is a combination zig-zag stitch width ...

The stitch length adjuster on my Bernina sewing macine is bent. Can I fix this myself? What is the Bernina model? If it's a mechanical machine, you can probably try to straighten it or replace it. If ...

My bernina aurora 440 sewing machine is making a high pitch humming noise when I turn it on These machines do make a noise during start-up, but if it stops after the sewing machine has gone through ...

Bernina 1130: Is it possible to override default factory settings for stitch length. I want to change from 2 to 3 A Bernina technician can probably do that for you. However, it's probably not ...

Bernina 1030 the teeth will not stay up and cannot feed material through You should probably take it to Bernina for service. It could just be a matter of adjustment or tightening a screw. On the other

Why won't my Bernina 16 respond to any commands Probably a software or computer component glitch. Unfortunately, it probably means a service call.

Do you have Bernina serger 1300DC owner's manuals? This will probably be helpful. Typically, the "M" is just a micro adjustment function available on the MDC machine. The DC machine probably does not ...