trouble printing a thicker form Hi:I am able to print normal forms on my IBM 6400, but when I try to use a thicker form for tax reporting, the printer starts up & stops after a couple of lines & I ...
057 close platen error message i turn printer on and i get ready message then i release a print job and i get "057 close platen" message on printer. I checked to make sure platen lever is set to "C" ...
Question about 6400 Matrix Printer
The print is only clear on the left side of the forms... Our techs "cleaned" our 6400 Matrix printer, but since they put it back together, the tension is way too tight. I used to be able to move the ...
print does not print. ink light flash. print does not print. ink light flash. News flash News Flash... Need Ink, Need Ink... I'd start by lifting lid and check my printing ribbon runs ok....
...prints seen alright thanks in advance Might be your gap is set to high. try moving the right lever from A to B for example and see if it clears it out. Also might be your parallelism, you will ...
Usually answered in minutes!
82 Questions
13 Questions
13 Questions
3 Questions
2 Questions