...printer what size paper is in the tray. You can temporarily resolve this by taping the guide in the A4 position, however you should consider replacing the tray or replacing the guide soon to avoid ...
...The copier won't copy. It says I need more paper in the lower tray. I'll have maybe 25-50 sheets already in there. Please help. Pull the tray out and look inside to see if the paper flag is
printer will not pick up the paper. With injet/lower cost printers, a mechanical flag or lever is actuated by the paper. It can be an optical sensor as well, more likely in a laser. The optical sensor
Question about Aficio 1013 All-In-One Laser Printer
The 8 1/2 x 11 paper tray will not open - it is not jammed with paper as the print still prints, but we cannot dislodge the tray. You need to forcibly open the tray, that's the only way. It could be ...
...tray.the printer sceen says to load paper into tray or there is no paper in the tray. i"am using 8 1/2 x 11 inch paper size which i have used before printing picture and even a few typed letters.i ...
Question about LaserJet M4345 MultiFunction Printer
...printer and it is saying 13.20.00 jam in tray 2, but there no paper there we remove the toner no paper, remove trays no paper, so whats causing it to jam? You could be having problems with the paper ...
...printer is making an occasional load clicking or clacking sound from the right side of the machine. It sounds like gears slipping over each other. The machine does not make a sound from the manual ...
Question about Xp600 Expression Premium A4 Colour Inkjet All-In-One Printer/Scaner/Copier
...Not sure but there is usually a lever or pin that sits near the bottom of the paper tray to let the machine know that there is or isn't paper in the tray. It may have broken off or become
Question about LaserJet 600 M602DN Laser Printer - M
...sides of the metal tray becomes dislodged and sits either on top or on the bottom of the tray and blocks the tray from moving through the full range. You will just have to jimmy it back into
Question about LaserJet 600 M602DN Laser Printer - M
...tray and look for a flag that hangs down. This flag should rotate up and down. If it does not, or is jammed then it is either dislodged or broken. Knowing the type of printer would help answer this ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions