Questions & Answers for: OKI C printer status pop up

...printer console is saying it's online. Help! Your USB cable is either too long (more than 9 feet), or too thin. This makes the connection strong enough for status, but too weak for data transmission. ...

...printer as per instructions for network. Everything installs okay. status monitor says network or power cable not connected. Everythings hooked up. I run windows xpsp2 with AVG, snappy fax and a ...

...printer keeps getting a paper jam. I can clear all the paper and the error message goes away but when I try to print again it just jams again. Do you know how I can fix it? Thanks. What is the status ...

...Any advice would be wonderful! Have you replaced the printer drums? The status monitor will tell you what percent they are at (similar to the toner cartridge status). This fixed my problem

...printer status says "Drum and toner life (black)." I can't seem to figure out what is wrong because I just replaced the toners and the drum works fine in my other Oki printer. Any help? Could very ...

...printer IP address status check result: "The printer is not ready, Make sure the printer is turned on and online." try switch off, unplug, hold up and down & reset button at the back, swith ...

Status monitor doesn´t. Everytime I get the message "Printer connection error". Thanks for advice, Tomas Check our USB cable. It should contain AWG marking on it. Depending on AWG number there is

...printer is not booting up. I installed a pop-up from Kodak and since that it is not working.Whats up with this? Deinstall the pop-up and if that takes care of the problem, something is wrong with the ...

...printer status corresponding to the indications of the LEDs. In Mac, the printer driver provides status information once you have sent a document to print. In Windows, if you have the Status Monitor ...

...status panel (printer and computer) are giving wrong info. Thanks Hello,First take out all paper from printer then arrange all paper and put more paper then feed the paper in the printer then try if ...