Questions & Answers for: printer smells burnt

...printer. If it is a burnt paper smell then it most likely a paper jamb at the fuser unit. Remove the toner cartridge to get access to the fuser and remove the paper (let the printer cool down first ...

I just bought a used Amana Dryer LEA30aw and when I turn it on it has a slight burnt smell. What could this be? At some point it was run without a filter or had a hole in the filter what your smelling

Printer stopped with error massage of "wrong carterage" on display ... I changed each ink carterage one at a time to see if I could eliminate the problem. Nothing worked. Took print head out and found

Canon mp780 does not turn on ? It's POWER ADAPTER faulty. Part number is HY7-2916-000 unplug it and plug it again. still not working then change the power cable Did this unplug it and plug it again. ...

...burnt black cartridge anymore to prevent further damage to the printer. Try to replace it with a new genuine cartridge. However, if error continues even with a new cartridge, please contact Lexmark ...

...smells burnt and wasnt not on. all i had plugged in it was my dsl and my printer..they all work in another socket... around the socket on the wall where you plug you can see a ring but it is not hot, ...

printer then I realized that is was 110 and not 220 v. I was too late to unplug it the power supply is burnt out or the power control board is burnt out. Get it checked by a mechanic and might require

...smells as if something burnt out on inside If you detect a burning smell, it's time to unplug the printer and replace it. Always unplug immediately whenever you have an electronic device with a ...

...smell, the wake up light is on, no other sign of life. Unplug the printer immediately. Popping soounds followed by burning smells indicate an over voltage issue on either the LVPS or the

...burnt (smoke, strange smell...), and since it will not work even when connected to 110V converter. Any chance to fix it myself? Whst should be replaced, where is it located and can you estimate the ...