Questions & Answers for: Lexmark Z printer print half letter

...printer x1270 not printing black replaced color and black cartridges - both half used, but black not printing.put in new color 27 and black 17 cartridges - test had no black printingcolor ok - no ...

...printer keeps printing out the same document or letter. I have tried uninstalling and reinstalling. I would like to know if I can avoid running the alignment test too. I can't tell you how much ink ...

...printer printing problems when printing only part of each letter in printed, and it just looks like lots of dots and lines and appears to be smudged. the more i try to print the worse its getting. it ...

print head (on the bottom where the ink comes out) across in one direction only (left to right) until it looks clean. Also, wipe the contacts inside the printer (on cartridge carrier). 6. Next dab the

...Z715 will only print yellow. Both cartrideges are half full. Clogged, or dirty plunger in this units printhead.. You need to check and clear the clogged unit.. Tihs printer is going to need

...:just go ahead and take out the inkjets :nw take out the power cable from back of the printer :after thirty secnds plug in the power cable :then put the catriges back and try to print ,it will ...

...the boxes are filled in correctly. CMS 1500 health insurance form Thanks Go into your printer software before printing, tell the software what you are printing on letter, 4x6 labels etc.... then ...

printer will not print correctly. I have half the amount of ink on both cartridges (black and color and photograph)I have tried all the repairs. I made sure the cartridges are in correctly. I have not

...printer may accept to print with the black ink, but the printouts may have horizontal lines and very illegible letters. In such a case a manual cleaning of the print head should be carried out. In ...

...printer turns on, reinsert your cartridges. If that doesn't help, try to clean the print cartridge nozzles. Open the Lexmark Solution Center on your computer -> From the Maintenance tab, click ...