Questions & Answers for: printer paused data

...2ips but not even close. Thanks what interface are you using? sounds like windows is sending the data to the printer as graphics which is much more intence then EPL hence the delay between each

...data to be transfered to the printer cannot cannot keep up with the printer and pauses while it gets more data. We have found that if you can select in your labelling software to print the barcode as ...

...data light will blink but no print cannot find the manual any help? You can find the manual in www.zebra.com, and try reset, pressing FEED and PAUSE keys and turn on printer, release keys until move ...

Z4Mplus pause or feed not working pause or feed not responding and blank on the screen, power, pause error, data all lights are on. The first mainboard of Z4Mplus falls short of this error and need ...

...saying printer idle , ribbon out Press the pause button to take the printer off pause... The data light is flashing because it has labels to print... Check to be sure your ribbon is loaded

...DATA light stays on. Any ideas on how to fix this? Check to see if the pause light is on also. Make sure you are using the correct printer driver. (105se) Try in ZPL and then try in ZPLII. Check ...

paused...what should i do Please make sure about its data cable because it is data cable issue. You can resolve if you can change its data cable otherwise replugged the data cable. Thanks go to double

The data light is showing that the printer is receiving the data but it is not printing anything Check to see if the printer is currently on pause or has an error showing.

printing data light is blinking the printing data light is blinking and printer is not printing Check if the machine print is put to paused, go to status and make sure you it is on resume not paused.

printing on TEC b-572 pauses When I do a big run of labels (500) it prints one label and pauses for a second then prints the next. Is there a setting I am missing? DEFAULT SPEED IS 9600 bauds, 8 data ...