Question about I-4208 Thermal Label Printer
...printer receives print information, the power LED blinks, but then you do not receive anything, check the communication cable LPT or serial is the speed of communication and the correct port (COM1, ...
Question about I-4208 Thermal Label Printer
...printer a break, during inventory times at work, we have to print 50K+ labels, and in order to prevent either serial number skipping or other issues, I print in 250 batches, yes; there is a time gap ...
...printer. This makes it possible to have the test print work just fine but no printing when a label format is sent the printer. If you are sending a format and nothing at all happens at the printer, ...
Question about DMX-I-4208 Label Printer
...print any more and not sure how to go about it? you can go to go to the website of the printer and click on support ask in the help box (is there an adjustment procedure for those screws) they are ...
...printer can not print at all.But every thing is ok. It's a thermal printer, the printer therefore needs to get hot to heat the paper and in turn print the document. The paper changes form due to ...
...printer itself will print sample labels if we click the buttons on the physical printer. also I am running a windows XP operating system (I believe). I havent used a windows operating system in a few ...
...printer. When print function is executed, the ready light flashes as though it is printing, but nothing prints. All internal print test work fine, and I am able to print configuartion. I am trying to ...
Question about I-4208 Thermal Label Printer
...Make sure that large green plastic printhead latch on right is pushed firmly toward back of printer while printhead is pressed down, to make positive lockdown of printhead. Try rotating round ...
printer is set to print one label at a time and after the label is removed it moves on to the next label in the queue. For some reason yesterday it started printing two each time (which makes them get
Question about I-4208 Thermal Label Printer
...printer, print a label (press the FEED + CANCEL buttons simultaneously) and examine it.. 2. While observing the printed labels, loosen the Thumbscrew and move it to the left most position. ...
Usually answered in minutes!
102 Questions
67 Questions
37 Questions
25 Questions
3 Questions