...LPT1. The device is not ready. Do you want to retry or cancel the job? We had a serious lighting storm and there was a close strike before the led's light to amber. Have you unplugged the printer and ...
...LPT1 and set the printer as the default printer. after installing the printer it is showing ready too. but when i give 'print test page' it's not responding and after some time it is showing that ...
...printer icon/ put curser over lexmark 640 printer and right click /open properties / open ports . tick LPT1 PORT AND TICK USB PORT then tick enable printer pooling and apply. PRINTER IS NOW ...
...printer port (such as LPT1). For example, at the c:\> command prompt, type the following: copy /b c:\5200FW.PDF lpt1 NOTE: If the file name or path includes a space, enclose the file name or path in ...
LPT1 for the printer HP D3745 the printer is not ready .........etc., how to solve this problem? I found this problem raised because of improper installation of drivers. I have down loaded the drivers
Question about MultiPASS C3000 All-In-One InkJet Printer
...LPT1 aren't ready. An HP Laser Jet III printer isn't printing at all. The computer indicates that the devices on LPT1 aren't ready. You perform a service self-test doesn't work, however. Which ...
Question about DeskJet D1460 InkJet Printer
...LPT1 the printer will not work. LPT1 is the large parallel port, while you are using USB on this printer. the red light came on probably because of a jam , or because of one of the documents in the ...
Question about Ubuntu 8.10 for Linux
...printer thru lpt1 using ubuntu Hi! im a newby in ubuntu, im running an old foxpro program in ubuntu using dosemu, but i can't get to print a reciept thru lpt1. your help will be much appreciated. ...
USB at the back of the PC yet connect it properly. At the Printer Panel see if the printer is ready or not. Usually this problem occur when the port setting of the printer defaulted at LPT1. Good luck
...LPT1 works. Printer stopped mid-job after working well for 3 years please check the printer statues ..after switch on the printer its comes to the ready condition ( ready is on ) .. second thing ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions